Paintable plaster shapes fitting, trimless circular housing, fully integrated plastered into the ceiling plaster board and making the light to be at the focus of attention.
After the plaster is poured in rubber moulds, each fitting is then hand finished to our exacting standards, which gurantee each exterior surface is made perfectly smooth, with all edges clean and crisp.
| Lamp type | GU10 |
| Lamps included | No |
| Dimension | φ130*45 mm |
| Cut-out diameter | φ135 mm |
| Material | Plaster |
| IP rating | IP20 |
| Wiring class | Class II |
| Max wattage | LED 10W/Halogen 35W |
| MOQ | 200 PCS |
| Product code | GC-1007 |
Putting on a pair of clean gloves!
Screwing the bracket on the plaster fixture(no need to screwing when the bracket is fixed)
Cutting out a hole
Cutting off power and Wiring the lamp holder
Tilting the fixture and insert into the ceiling.
Holding the fixture down and put two screws through the plasterboard
Plaster or fill the gap, allow this to dry.
When dry insert lamp and position spring clip to retain the lamp
Made of high strength plaster
The bond between luminaire and ceiling is seamless
Can be painted in different finishes
GC-1005 gypsum lights and this circular plaster in ceiling light are two classic styles of plaster lamps. Their installation effects are the same and you can choose either one.
Contact us for more information.
EPE protected
Can be customized for QTY above 1000 pcs
Down light: 100,000 pcs per months
Wall light: 60,000 pcs per months
Leadtime: 30-45 days
Over 2,000 sets of mouldings
